Dogtra 1800 Series User Manual download pdf (Page 15)

26

TESTING

27

OPERATING

Fitting the Collar

The collar strap should be adjusted so that

the contact points are held firmly against the

dog’s skin. If the collar is too loose, irritation

may result from the contact points rubbing

against the skin.

If the dog has a heavy coat, move the

receiver up and down to work the contact points

down into the coat.

ATTENTION!

Avoid having the dog wear the collar with

the contact points in the same place for more

than 8 hours at a time. Leaving the points on

the same spot for extended periods of time

can cause skin irritation. If the dog is to wear

the e-collar for long periods, occasionally

reposition the collar so that the contact points

are moved to a different spot on the dog’s

neck.

OPERATING INSTRUCTIONS

2. Watch the test light as you push the “Nick”

button on the transmitter. It should light for

just a moment.

3. Watch the test light as you push the

“Constant” button on the transmitter. It should

glow brightly. As a safety feature, the collar

receiver will automatically shut off stimulation

if the constant button is depressed for twelve

seconds or longer.

4. Change the intensity dial on the transmitter

clockwise and then counterclockwise. The test

light should glow brighter with higher levels of

stimulation and dimmer with lower levels.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments