Dogtra YS200 User Manual download pdf (Page 5)

Testing The Yapper Stopper

1) Turn on the “Yapper Stopper” by turning the

intensity dial clockwise and set it on level eight.

2) Fit the test tool on the sensor of the collar.

3) Test by scratching the rough surface of the test tool

on the collar (as shown in the diagram) using a

fingernail or pen. When the light comes on, wait

for two seconds, then repeat the same process once

more.

SELECTING ON-OFF & INTENSITY

LEVELS.

Level 1 is lowest and 8 is the highest.

By turning the ON/OFF dial clockwise with your

thumbnail, stimulation intensity increases and by

turning counter-clockwise, it decreases.

The dial on the collar is used to turn the “Yapper

Stopper” ON and OFF and for selecting the intensity

level.

To turn OFF the “Yapper Stopper”, position as

shown above.

(+)

Increase

(

)

Decrease

1 2 3 4 5 6 7 8

No comments

Dogtra YS200 User Manual Page 5